Industry Knowledge
2026-10-27 17:12:16
Production practice has demonstrated that flotation performance varies according to the particle size of the minerals. Both coarse and fine particles yield poor flotation results; even when the minerals have been fully liberated, recovery rates remain low. Furthermore, the presence of ultra-fine particles can coat the froth product, thereby negatively affecting the grade of the concentrate.
For any given ore, there exists an optimal particle size range for flotation. Consequently, determining the appropriate grinding fineness is crucial for achieving superior technical and economic outcomes in the flotation process. To ensure favorable flotation results, the grinding fineness must meet the following requirements:
Achieve substantial liberation of valuable minerals
Prior to flotation, only a minimal amount of composite particles—consisting of both valuable minerals and gangue—should remain.
Ensure mineral particles fall within the optimal size range for flotation
For the flotation of non-ferrous sulfide ores, the feed particle size generally should not exceed 0.2–0.3 mm. Coarser particles are too heavy to be effectively lifted by air bubbles and are prone to detaching from them.
Minimize the formation of "slimes" (excessively fine particles)
When mineral particles are smaller than 0.01 mm, flotation performance declines significantly; at sizes below 2–5 microns, it becomes virtually impossible to separate valuable minerals from gangue.
chat online
Phone
24-Hour Hotline
Inquire Now
TOP