Industry Knowledge
2026-09-25 16:22:33
The mantle (moving cone) and concave (fixed cone) liners should be replaced when they have worn down by 65%–80% of their original thickness, or if they exhibit localized wear, deformation, cracking, or pitting. After installing the liners, verify that they are properly centered; misalignment can lead to collisions during operation, resulting in inconsistent product particle size and overheating of internal friction components. Before pouring the zinc alloy, all gaps must be tightly sealed with clay or asbestos to prevent the molten alloy from leaking out. Ensure that all surfaces coming into contact with the alloy are completely dry, as any moisture could trigger an explosion. Consequently, these surfaces must be preheated and dried; alternatively, to save time by skipping the preheating step, a thin layer of machine oil can be applied to the contact surfaces before proceeding with the pour using specialized equipment. Once the pouring is complete, tighten the liner fastening bolts.
chat online
Phone
24-Hour Hotline
Inquire Now
TOP