Industry Knowledge
2026-09-18 16:05:24
Once ore feeding has begun, the crusher is in a loaded operating state. Operators must observe the following requirements:
(1) Ore must be fed uniformly, and the product particle size must meet specified requirements.
(2) Continuously monitor the discharge process and the operation of the conveyor belt to prevent blockages.
(3) Regularly check the oil pump, cooler, and filter, as well as the oil level and temperature; the return oil temperature must not exceed 60°C.
(4) Check the drainage from the water-seal dust-prevention system; the crusher must not be operated if there is no water flow.
(5) Monitor the oil pressure in the locking cylinders; the adjustment ring must be in a locked state before the crusher can be operated.
(6) Periodically inspect the liners for wear, paying particular attention to the bolts securing the liners to the adjustment ring. If these bolts become loose, the liners may shift. After 24 hours of operation following the installation of new liners, the unit should be shut down to retighten the bolts.
chat online
Phone
24-Hour Hotline
Inquire Now
TOP