Industry Knowledge
2026-09-28 16:23:56
In practical operations—whether determining pulp density or pulp fineness—the following points must be observed during sampling and testing to ensure that the results are truly representative:
(1) The sampling container must be accurately calibrated for both its tare weight and volume. After each use, it must be thoroughly cleaned and emptied; no water or ore particles should remain inside.
(2) When collecting a sample, position the opening of the container directly facing the pulp flow. Move the container at a constant speed across the entire width of the flow to capture a representative sample.
(3) Stop sampling the moment the pulp begins to overflow from the container’s overflow outlet; this ensures the sample is representative and the results are accurate.
(4) Weighing must be performed with care and precision. The scale used must be zeroed and kept clean; it should be cleaned and wiped dry after every use to prevent measurement errors.
(5) If the solid content is high, perform the screening in batches. Do not pour a large volume of pulp onto the screen at once, as this can damage the screen mesh and hinder the screening process.
(6) Wet screening must be conducted in a designated basin or tank. Ensure the screening process is thorough to guarantee reliable results.
(7) Take care to prevent any loss of material due to splashing during the screening process; if such loss occurs, the test must be repeated.
chat online
Phone
24-Hour Hotline
Inquire Now
TOP