Industry Knowledge
2026-09-29 16:25:57
The following points should be observed during the installation of the machine:
(1) Given that a jaw crusher generates significant vibration during operation, it must be installed on a concrete foundation. To mitigate vibration, noise, and any potential impact on the foundations of nearby structures, a layer of hardwood, rubber belting, or other vibration-dampening material should be placed between the crusher and the concrete foundation.
(2) The discharge chute of the foundation must be lined with a metal plate and set at a sufficient incline (determined by the flow characteristics of the material, but no less than 50°) to ensure the smooth discharge of the crushed product.
(3) The size of the discharge opening should be adjusted according to the required product particle size. To make adjustments, loosen the T-bolts and the tension springs. Use the jacking bolts to push the adjustment seat open, then insert or remove shims of the appropriate thickness. Retract the jacking bolts; the adjustment seat will then press firmly against the frame’s lugs under the weight of the moving jaw, simultaneously compressing the shim assembly. Subsequently, adjust the pre-tension of the springs to ensure that the toggle plate remains in tight contact with the toggle seat during operation. Finally, lock the adjustment seat securely in place.
chat online
Phone
24-Hour Hotline
Inquire Now
TOP