Industry Knowledge
2026-10-15 16:29:51
The toggle plate (also known as an elbow plate) of a jaw crusher serves not only to transmit power—causing the moving jaw to oscillate back and forth—but also acts as a safety mechanism. Furthermore, adjusting its length allows for the regulation of the discharge opening (setting).
When an uncrushable object (such as an iron ball or a piece of scrap metal) enters the crushing chamber, the rear toggle plate functions as a safety component to protect the primary parts of the equipment from damage. The rear toggle plate is typically cast as a single piece of cast iron, with a groove or several small holes machined into its center to reduce its cross-sectional strength. Alternatively, it may be cast in two separate pieces and joined together with screws (or rivets) to form a composite toggle plate. If an uncrushable object enters the crushing chamber, the equipment becomes overloaded; the resulting excessive crushing force is transmitted to the toggle plate, causing it to break—or, in the case of a composite toggle plate, causing the connecting screws to shear—thereby halting the machine and providing the intended safety protection.
As the jaw plates (crushing plates) undergo continuous wear, the discharge opening gradually widens, resulting in a coarser product. To maintain the required product particle size, the size of the discharge opening must be adjusted periodically. There are two primary methods for adjusting the discharge opening:
(1) Shim adjustment: This involves placing a set of shims between the support seat of the rear toggle plate and the rear wall of the machine frame. By adding or removing shims—or changing their thickness—the size of the discharge opening can be adjusted. This method offers a compact design and reliable adjustment, making it the preferred choice for large and medium-sized jaw crushers.
(2) Wedge adjustment: This method uses two wedges positioned between the rear toggle plate seat and the machine frame to adjust the width of the discharge opening. This approach is generally suitable for smaller-sized crushers.
chat online
Phone
24-Hour Hotline
Inquire Now
TOP